Price Match

QUESTIONS & ANSWERS

Ask a Question
  • Hi - I have a Kasco Dock Mounted De-Icer/Circulator. Will the Scott Digital Oscillator work with my Kasco water circulator?

    Yes - The Scott Digital Oscillator can be used with the Kasco dock mounted deicer and also with other Kasco models that use the Kasco Universal Dock Mount or the Kasco Industrial Dock Mount.

    The rotating shaft of the Scott Digital Oscillator is a standard 1" IPS (Iron Pipe Size).

    The Kasco Universal Dock Mount also uses a 1" IPS pipe. To attach the two 1" pipes together - a 1.25" pipe (such as a 1.25" Galvanized pipe nipple) can be used as a connecting sleeve. To accomplish this, drill 2 holes, one at each end of the 1.25" pipe nipple, and then use a bolt to attach the 1.25" sleeve to each 1" pipe.

    The Kasco Industrial Dock Mount uses a 1.5" IPS pipe. By drilling a bolt hole in the 1.5" Industrial Dock Mount pipe, the Industrial Dock Mount can be directly mounted onto the Digital Oscillator's 1" pipe.

    By using this method, the Scott Digital Oscillator can also be connected to other water movers such as the Power House Ice Eater.

    If this explanation was confusing, please give us a call and we'll walk you through the steps.

  • I have about a 60' run to electrical- If I purcahse the Oscillator, does that plug into the Aquasweep, and then the cord from the Aquasweep runs to the plug-in on shore? Or will both the Aquasweep and the Oscillator need to be pluged in separte at shore?

    Both the Aquasweep and the Oscillator will plug in separately. Therefore both the Aquasweep and the Oscillator will require cables to be run back to the electrical outlets.

  • Does this come with dock mount and everything you need to just install and start it?

    This listing is JUST for the Oscillator. 

    This Oscillator assembly consists of the following components:
         1. The motor head that drives the Oscillating motion
         2. A fixed shaft that is used to mount the Oscillator to the dock
         3. A rotating shaft that power head and mounting yoke of the Aquasweep or De-Icer bolts onto
         4. An adjustable height horizontal stabilizing plate that helps maintain the fixed and rotating shafts a set distance apart
         5. The power cable

    If you order the just the Oscillator, you will need to already have a Dock Mounted Aquasweep or De-Icer in order to put the Oscillator into service. 

    This Oscillator does not ship with a Dock Mounting Plate. You will use the existing Dock Mounting Plate or the Dock Post Mount Bracket that came with your Aquasweep or De-Icer to mount it to your dock.

    You can order a complete Aquasweep with an Oscillator by going to this link:
    Dock Mounted Aquasweep with Oscillator


Recently Viewed


Added to cart!